Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Troubleshooting Troubleshooting for Print Quality Problems 125
3.6.2 White Out 3.6.3 Back of Paper Gets Dirty
Description of the problem:
In the image, there are extremely light areas or
areas where image is completely missing.
Parts that may be the source of this error
Photoconductor Unit (p.135)
Transfer Roller (p.136)
High Voltage Unit (HV1) (p.151)
Main Board Assy (C533/C534 Main)
(p.146)
Step Action and Question Yes No
1
Paper check
♦Is the paper moist?
Set the paper
taken from a
newly opened
package.
Go to Step 2
2
Photoconductor roller
♦Is the OPC drum scratched or seamed?
Replace the
Photoconductor
Unit.
Go to Step 3
3
Checking the inside of printer
♦Is there any foreign matter on the paper path?
Remove the
foreign matter.
Go to Step 4
4
Transfer roller
♦Is the Transfer Roller scratched or soiled?
Replace the
transfer roller.
Replace the
high voltage
unit (HV1).
Replace the
Main Board
Assy.
Description of the problem:
The back side of the paper is soiled.
Parts that may be the source of this error
Fuser Unit (p.152)
Transfer Roller (p.136)
Step Action and Question Yes No
1
Checking the inside of printer
♦Is there any foreign matter on the paper path?
Remove the
foreign
matter.
Go to Step 2
2
Fusing roller
♦Is the fusing roller scratched or soiled?
Replace the
Fuser Unit
(fusing
roller).
Go to Step 3
3
Transfer roller
♦Is the Transfer Roller scratched or soiled?
Replace the
transfer roller.