Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Product Description Notes on Installation of Optional Units 66
1.13.2 Jumper Setting
C533MAIN (for EPL-6200) is equipped with two resistance jumpers.
C534MAIN (for EPL-6200L) is equipped with one resistance jumper.
1.14 Notes on Installation of Optional Units
Notes on Installation of Duplex Unit
The Duplex Unit cannot be installed without the Lower Cassette Unit installed.
Install the Duplex Unit by the following procedure.
1. Remove the rear cover of the Lower Cassette Unit. (Two screws)
2. Install the Lower Cassette Unit on the printer body.
3. Install the Duplex Unit.
4. Remove the Connector Cover for the Duplex Unit found at the rear of the
printer body, insert the connector into the printer body, and put the Connector
Cover back in its position.
• If you would like to remove the Duplex Unit, reverse the procedure of steps 1 to
4 above.
Resistance Jumper
R1101 R1102
WW: Letter/A4
Installed: Letter
Not installed: A4
WW: No setting
J: AGFA Font availability
Installed: Not available
Not installed: Available
J: OEM/Brand
Installed: OEM
Not installed: Brand
WW spec setting Not installed (A4) Not installed (default)
J spec setting Not installed (Font available) Not installed (brand)
Resistance Jumper
Setting for Markets
R111
J spec setting Installed:
WW spec setting Not installed:
C A U T I O N
If you use a wrong procedure, the Duplex Unit may be broken.