Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Product Description Controller Specification 40
1.4.2.2 USB Interface
Supports Windows USB PnP.
Supports the 18-digit USB ID as follows:
**P++YYMMDDhhmmssR
**: A number of 00 to 99. Acquired for each model.
“24” for EPL-6200. “23” for EPL-6200L.
P: Identifier. Always “P” for page printers.
++: PC number of assembly line. (00~99)
YY: The year of assembled date. (lower two digits; 00~99)
MM: The month of assembled date. (01~12)
DD: The assembled date (01~31)
hh: Hour of assembled time. (00~23)
mm: Minute of assembled time. (00~59)
ss: Second of assembled time. (00~59)
R: Reserved and always “0” with EPL-6200/EPL-6200L.
The USB ID written into the printer can be checked on the Status Sheet.
1.4.2.3 Type B Interface (Not Available with EPL-6200L)
EPL-6200 is equipped with one Type-B option I/F slot as standard.
Main System Type:
MTP1200dpi, PW10200dt1200dpi, PRG(****)rev, AP500ma, SPD0fast, D4
NOTE:
****: ROM version
Printer Name :Factory default setting is the same as Product Name.
Product Name : EPL-6200
Emulation Type / Entity Type
C A U T I O N
If the circuit board is replaced, or other service performed, the USB
ID may be changed to another ID (this is because the USB ID is
rewritten when the EEPROM storing the USB ID is damaged or the
circuit board is replaced).In this case, if a printer with the USB ID
changed is connected to the PC, it is recognized as a different
printer, so the PC requires the USB port driver to be installed
again.
Table 1-40. Emulation Type / Entity Type
Emulation Emulation Type Entity Type
PS POSTSCRIPT-00 LaserWriter
ESC/Page ESCPAGE-04 EPSONPAGE4
LJ4 PCL5E-00 EPSONPCL5
I239X PRPXL24-01 EPSONPRPXL24
GL/2 HPGL2-01 EPSONHPGL2
FX ESCP9 EPSONFX
ESCP2 ESCPL2 EPSONLQ2
PCLXL PCLXL EPSONPCLXL