Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Operating Principles Description of Mechanisms 78
2.2.3 Development Process (Imaging Cartridge)
2.2.3.1 OVERVIEW
The Developer Cartridge and development section are constructed as described below:
This printer employs one-component FMT (Fine Micro Toning) development
method.
Toner in the Developer Cartridge (toner cartridge) is sent into the toner sending
roller area by the toner agitation blade.
Then the toner, through the resin sleeve, is made to stick to the latent image area
produced by exposure to the laser beam on the OPC drum, thus a toner image is
formed.
The Imaging Cartridge consists of the Developer Cartridge (toner cartridge) and
the Photoconductor Unit (Drum Cartridge).
2nd toner blade
Figure 2-13. Development Process (Imaging Cartridge)
Toner Containing Space
Toner Hopper
Toner Agitation Blade
Toner Sending Roller
OPC Drum
Development Roller
第 1 トナーブレード
2nd Toner Blade
Resin Sleeve
1st Toner Blade
Bias Seal
Developer Cartridge
Photoconductor Unit
Imaging Cartridge
Imaging
Cartridge