Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Adjustment Feed Registration Adjustment 169
5.3 Feed Registration Adjustment
With the EPL-6200/6200L, the image registration position in sub-scanning direction
(paper feeding direction) is adjusted on each engine mechanism and the registration
position correction value is stored on the non-volatile memory on the main controller at
the factory.
The registration position should be verified and re-adjusted, when any repair with the
main contoller replacement is made. Follow the instructions below to make the feed
registration position adjustment.
5.3.1 Preparation
To make the feed reregistration adjustment, an exclusive adjustment program is
required.
Program Name
AdjustFeedRegi.exe
Applicable Models
EPL-6200, EPL-6200L
System Requirements
Supported OS: Windows 98/Me/2000/XP
Supported Port: Parallel, USB (for Windows Me/2000/XP)
Installation
Put all files in the supplied compressed archive file, into a single folder. (To
uninstall, simply delete whole folder.)
5.3.2 Adjustment
Follow the steps below to execute the adjustment program and proceed the adjustment.
1. Connect the target printer to the PC, and turn it on.
2. Double-click on the adjustment progarm icon, and the following main program menu
window is displayed.
3. Specify the model to be adjusted in the [Model Name] list box.
C A U T I O N
Do not start the adjustment program before connecting the
parallel cable to the printer.
This program can not be executed together with EPSON Status
Monitor on Windows 95/98. Be sure to terminate the EPSON
Status Monitor before starting the adjustment program.
If the power to the printer is turned off or the parallel cable is
disconnected during running of the adjustment program, be sure
to restart the program.
On the “Details of Display” tab of “Property of Screen”, do not
change “font size.”