Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Product Description Outline 14
CONTROLLER FEATURES
<EPL-6200>
High-speed controller
CPU : TMPR4955BFG 200 MHz (Same as for EPL-N2500)
RAM : 8 MB fitted as standard RAM and Expandable up to 136 MB
Max.
Exclusive RAM DIMM for EPSON (Same as for EPL-6100)
Equipped with one Type B interface slot (Level 3 supported)
Two standard interfaces
IEEE1284 parallel interface
USB interface
Real 1200dpi supported
(Only in ESC/Page, PCL6, PostScript 3. Up to 600 dpi supported in other modes)
NOTE:
1200 dpi printing needs much memory. At 1200 dpi printing,
therefore, the possibility of running short of memory is high with
standard memory.
Recommendation: Extension of 16 MB or more.
EnhancedMicroGray installed (available only in 600 dpi and 300 dpi.
Automatically switched off when 1200 dpi is selected.)
RITech installed (available only in 600 dpi and 300 dpi. Automatically switched
off when 1200 dpi is selected.)
PCL6 emulation is installed as a standard feature.
Adobe PostScript3 is installed as a standard feature.
No optional ROM DIMM slot.
<EPL-6200L>
Host-based controller
CPU : EPSON 32 bit RISC S1C33000 48 MHz
RAM : Standard RAM is 2 MB
RAM can be not expanded.
Two standard interfaces
IEEE1284 compatible parallel interface supporting ECP.
USB interface (USB revision 1.1, supporting USB ID).
Data compression technology
Sending compressed data from a host computer allows printing most of the
data with only standard memory.
An expanded circuit hardware provides high-speed processing.
No toner save mode
No 300 dpi mode
No RITech or PGI (EnhancedMicroGray)