Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Product Description RAM Expansion 57
1.7 RAM Expansion
When EPL-6200 runs out of memory, the Memory LED flashes or lights up.
In this case, you have to mount expanded RAM (RAM DIMM).
This problem may be solved by taking appropriate ones of the following measures:
Reducing the resolution.
Select “Halftone” when using Enhanced MicroGray.
Reducing the receiving buffer size to “Minimum”.
Use only one interface and set “Off” for other interfaces.
The only way to definitely avoid memory shortages is to install more memory.
(Commercially available SDRAM DIMM for PCs: 90 pins, 32-bit without SPD)
1.8 System Requirements (Only for EPL-6200L)
The minimum system configuration and recommended system configuration when
using EPL-6200L are shown in Figure 1-56 (p.57) and Figure 1-57 (p.57).
Note “*1”: Exception: The requirement given here does not apply to the case where the
minimum configuration required by each OS or application is higher than specified
above.
“*2”: Limited to PC's who support the USB as standard equipment. Operation is not
guaranteed with a USB port installed in an expansion slot. Connection through a
device that switches the interface, such as a Parallel - USB converter, is not covered
by the warranty. When connecting through a USB port, operation under Windows
95 is not covered by the warranty.
C H E C K
P O I N T
With EPL-6200L, RAM cannot be expanded (fized to standard
RAM size : 2MB).
However, EPL-6200L can print most types of print job with the
standard RAM; by employing a high efficiency data compression
algorithm and a hardware accelerated data expansion function.
Table 1-56. Windows
Windows Minimum
*1
Recommended
*1
CPU Pentium ←
Clock 133MHz 233MHz or more
Memory 16MB 64MB or more
Interface
IEEE1284 Parallel
Standard USB
*2
←
OS
Windows 95/98/Me/XP
Windows NT 4.0
Windows 2000
←
Table 1-57. Mac
Mac Minimum Recommended
Machine
Power Mac G3 with
standard USB
or
iMac
iBook
←
Clock 233MHz ←
Memory 32MB 64MB
Interface Standard USB ←
OS Mac OS 8.6 or later, 9.X, 10.1.2 or later ←