Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Product Description Control Panel (EPL-6200L) 48
1.6.2 Printer Setting Items
A list of setting items for this printer is shown below.
Setting Items for which the Printer Stores the Changed Settings
Note : Values shown in bold and underlined characters are the factory default setting
values.
Note “*1”: 15 minutes.
“*2”: These setting operations are not opened to users.
For setting method, see “Special Operation (EPL-6200L) (p.54)”.
Setting Items that are Valid only in the Job, and are not be Stored in the Printer
Users can select setting items on the printer driver, and actual processing is performed
by the printer.
Setting Items Requiring Administration by the Printer for each Printing or state
change
Note : The “*” means that those items are under control of EEPROM.
Table 1-52. Function Setting (1)
Setting item Setting values
Sleep Mode ON
, OFF
*1
Toner Out Error Continue, Stop
Physical OffsetTop
*2
-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Physical Offset Left
*2
-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Humidity
*2
Normal, High
Table 1-53. Function Setting (2)
Setting item Setting values
Paper Size A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10,
DL, C5, C6, IB5, User defined size
User defined size Width 76.2. ~ 216.0mm
Length 127.0 ~ 355.6mm
Copies 1 ~ 999
Toner Save ON, OFF
Top Offset -9 ~ 0 ~ 9 mm
Left Offset -9 ~ 0 ~ 9 mm
Paper Type Normal, Thick-Wide, Thick-Narrow Transparency
Density 1, 2, 3, 4, 5
Auto Continue ON, OFF
Ignore Paper Size ON, OFF
Table 1-54. Function Setting (3)
Administrative items Range of values
*Total Pages 0 ~ 99999999 pages
*Jam Counts 0 ~ 65534 times
*Genuine Toner Change 0 ~ 254
*Non genuine Toner Change 0 ~ 254
*Toner Life counter 0 ~ 100%
(Both 3K and 6K will reset to 100% by counter reset)
*Photoconductor Life counter 0 ~ 100%
*USB ID
MP Tray Paper Size A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, User defined size
Interface mode of Parallel I/F ECP, Nibble
Firmware version
*Registration position
(paper feed direction)
-5.98 ~ 5.98 mm step 0.46mm
CSIC items
C H E C K
P O I N T
Since character strings administrated in the printer do not exist,
names of setting items and setting values are described in names for
explanation. Consequently, these names do not match character
strings displayed in driver's user interfaces and the Status Sheet.