Filter
Top Products
EPSON EPL-6200/EPL-6200L Revision A
Disassembly and Assembly Removal and Installation of Circuit Boards 146
4.4.1 Main Board Assy (C533/C534 Main)
4.4.1.1 EPL-6200 (C533 Main)
1.
Remove the Right Cover. (p.139)
2. Remove the three screws, and remove the protection sheet metal.
(See Figure 4-21)
3. At the rear of the printer, remove the two screws and remove the TYPE-B slot cover.
(See Figure 4-22)
4. Remove the TYPE-B guide rail.
(Continued to next page)
Figure 4-21. Removing the Protection Sheet Metal (EPL-6200)
Figure 4-22. Removing the TYPE-B Slot Cover and Guide Rail
C A U T I O N
Take care not to break the flat cable.
When installing the Main Board Assy, pay attention to the
orientation of the terminal side and insert the board into the inmost
depth properly.
Screws x 2
TYPE-B Slot Cover
TYPE-B Guide Rail
Four hooks