Filter
Top Products
CHAPTER 2 Before Using the REMCS Service
2.2 Connection Configuration for Connecting to the REMCS Center
4
C122-E180-01EN
FIGURE 2.1 Internet connection (using the network connected to the user port)
Using a network not connected to the user port
FIGURE 2.2 Internet connection (using REMCS port) shows a configuration that uses the REMCS port to
connect to a network other than that connected to the user port. The SMTP server of an ISP (Internet Service
Provider) cannot be specified.
Remarks
- The IP address of [Maintenance Port] must be set from the Web-UI of the MMB.
- Be sure to specify the SMTP server with the IP address.
FIGURE 2.2 Internet connection (using REMCS port)
2.2.2 P-P connection (ISDN: e-mail)
Use a P-P system using a line such as an ISDN line for communication with the REMCS Center.
Through the network connected to a USER port
FIGURE 2.3 P-P connection (ISDN: e-mail) (using the network connected to a USER port) shows a
configuration that uses the network connected to a USER port.