Filter
Top Products
CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
13
C122-E180-01EN
When the connection configuration is [P-P Connection(ISDN: Mail Only)] or [P-P
Connection(VPN:Mail Only)]
If you selected [P-P Connection(ISDN: Mail Only)] or [P-P Connection(VPN: Mail Only)] in the window shown
in FIGURE 3.4 [Initial Settings] window, the window shown in FIGURE 3.6 [Point-to-Point Connection
environment settings] window appears.
After setting the REMCS service, you can still change the connection information by clicking [Connection
Environment] from the menu in the window shown in FIGURE 4.1 [REMCS initial] window.
FIGURE 3.6 [Point-to-Point Connection environment settings] window
1. Enter the values for the following items.
TABLE 3.2 Input items for the [Point-to-Point Connection environment settings] window
Item
Description
SMTP/PROXY Server
Enter the SMTP/PROXY server name or IP address in single-byte
alphanumeric characters and symbols.
Sender E-mail Address
Enter the sender e-mail address in single-byte alphanumeric
characters and symbols.
Division method
Select the division method from [No division], [Mail division], and
[Event division]. The initial value is [Event division].
Division Size
Enter the partitioning size in the range of 10 to 100 Kbytes. The
initial value is 64 Kbytes.
Encryption type
If the S/MIME format is not supported before the firmware update,
the initial value is [Previous encryption]. The initial value at the
firmware update time is the setting before the firmware update.
2. Click the [Next] button.
After the connection configuration is registered, the window shown in FIGURE 3.7 [Periodical
Connection settings] window appears. Proceed to 3.2.4 Setting the periodic connection schedule.
3.2.4 Setting the periodic connection schedule
In the window shown in FIGURE 3.7 [Periodical Connection settings] window, specify the periodic
connection schedule.
After starting the REMCS service, you can still change the periodic connection schedule by clicking
[Periodical Connection] from the menu in the window shown in FIGURE 4.1 [REMCS initial] window.