Filter
Top Products
CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings
5.2 Detail Environment Settings
42
C122-E180-01EN
FIGURE 5.3 [Environment settings] window in case of P-P connection
TABLE 5.3 Items in the [Environment settings] window in case of P-P connection
Input item
Maximum
number of
digits
Input
Description
E-Mail settings
Timeout
4
Required
Enter the timeout trigger for E-Mail (seconds)
in single-byte numeric characters.
Range: 60 to 3600
Retry Count
2
Required
Enter the retry count for E-Mail in single-byte
numeric characters.
Retry interval
3
Required
Enter the retry interval for E-Mail in single-
byte numeric characters.
Range: 1 to 600
SMTP/PROXY server
128
Required
Enter the name of SMTP/PROXY server or
IP address in single-byte numeric character
and alphabets
PORT No.
5
Required
Enter the port number of the SMTP server in
single-byte numeric characters.
Initial value: 25 (Well Known Port is used.)
Range: 1 to 65535
Type of encrypted
connection
-
Required
Select type of encrypted connection of SMTP
over SSL from ‘none’ (default), ‘STARTTLS’
and ‘SSL/TLS’
Connection control
IP version priority
-
Required
Select the priority of IP version from ‘none’,
‘IPv4 (default)’ and ‘IPv6’
Others
Sender E-Mail
Address
128
Required
Enter the e-mail address of originator in
single-byte numeric characters and
alphabets.
Large data
transmission method
-
Required
Select dividing method from ‘none’, ‘event
dividing’ (default).
Split size
3
Required (*1)
Enter dividing size in single-byte numeric
characters.
- mail
Default: 64 KB
Range: 10 to 100 KB
- event
Default: 512 KB
Range: 64 to 512 KB