Filter
Top Products
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
50
C122-E180-01EN
problem is not solved,
contact the support center.
RMG_0210
Personal information deletion frame display
has been completed.
None.
TABLE 6.10 Messages in the [Customer Information Review] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004
Invalid CGI parameter specified.
RMG_0150
Failed to read setting file.(xxx)
RMG_0215
This certificate cannot be verified up to a CA
certificate.
None.
TABLE 6.11 Messages in the [Automatic registration state] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004
Invalid CGI parameter specified.
RMG_0038
Automatic registration started.
None.
RMG_0039
Automatic registration completed.
RMG_0040
Automatic registration failed. (xxx:xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
TABLE 6.12 Messages in the [Internet (Mail Only) connection environment settings] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data.(xxx)
RMG_0004
Invalid CGI parameter specified
RMG_0006
Failed to get connect mode. (xxx)
RMG_0015
Invalid entry.
Correct the entered value.
RMG_0016
Input value is out of range.
RMG_0018
Failed to get registration data (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0030
Specify [UserID]/[Password]/[POP Server] all
when you specify POP server.
Correct the specified POP
server information.
RMG_0031
Specify [UserID]/[Password] all when you
specify AUTH SMTP.
Correct the specified AUTH
SMTP information.
RMG_0036
Required entry.
Enter a valid value.
RMG_0037
Execute registration of REMCS environment
data.
Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0041
Failed to setting Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.