Filter
Top Products
CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
16
C122-E180-01EN
characters).
Specify the country name with the code in
the A2 column of ISO-3166 Code Table
(two letters). For a country not specified in
the table, specify 99.
Machine
Installation
Site
30
Optional
N/A
Enter the machine installation site (not
required if it is the same as the [Address]
value).
Machine
Installation
Building
20
Optional
N/A
Enter the machine installation building
name (not required if it is the same as the
[Address] value).
FE's E-mail
Address
60
Optional
Applicable
Enter the e-mail address of the installer
(field engineer). E-mail notification of
completion of the connection check is
also sent to this email address.
Delete the
personal
information
Check box
Optional
N/A
Specify whether personal information
should be deleted. If checked, the values
entered for the items for which the
[Personal information] column in this table
indicates [Applicable] are not retained as
customer information for the MMB.
Checked: The values are deleted.
Not checked: The values are not deleted
(default).
*1: Considered personal information to be protected. If the personal information is deleted from the window
shown in FIGURE 5.7 [Deleting the personal information] window by the FE, the information is deleted
from the MMB customer information.
*2: The number of characters in the zip/postal code depends on the country in which the PRIMEQUEST
2000 Series server is installed.
1. Enter the customer information.
2. Click the [Next] button.
After the customer information is registered, the window shown in FIGURE 3.9 [Customer Information
Review] window appears.
FIGURE 3.9 [Customer Information Review] window
3. Click the [Next] button.