Filter
Top Products
CHAPTER 3 REMCS Service Start Procedure
3.4 Replacing the S/MIME certificate during the initialization work
22
C122-E180-01EN
FIGURE 3.18 [Automatic registration state] window
6. Click the [OK] button.
After the registration is completed, the window shown in FIGURE 4.1 [REMCS initial] window appears.
3.4 Replacing the S/MIME certificate during the initialization
work
This section describes the procedure for replacing the certificate.
1. Click [Replacement of certificates] from FIGURE 3.4 [Initial Settings] window to display FIGURE 3.19
[Replacement of certificates] window (during initialization work).
FIGURE 3.19 [Replacement of certificates] window (during initialization work)
2. Specify the certificate file and then click the [Next] button. FIGURE 3.20 [Confirmation of certificate]
window (during initialization work).