Filter
Top Products
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
52
C122-E180-01EN
RMG_0095
Connection type mismatch.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0181
Invalid E-mail address specified.
Enter a valid value.
RMG_0189
Execute registration of REMCS environment
data.After this operation, all events are not
sent to the REMCS Center until connection
check is completed.
\nAre you sure?
Click the [OK] or [Cancel]
button.
RMG_0207
Invalid value in [Split size].Please specify it
within the range of 10-100.
Enter a valid value.
RMG_0208
Invalid value in [Split size].Please specify it
within the
range of 64-512.
TABLE 6.14 Messages in the [Periodical Connection settings] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0006
Failed to get connect mode. (xxx)
RMG_0015
Invalid entry.
Correct the entered value.
RMG_0016
Input value is out of range.
RMG_0018
Failed to get registration data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0027
Failed to change Machine status. (xxx)
RMG_0036
Required entry.
Enter a valid value.
RMG_0048
Invalid end time.
Confirm the start time and
set a valid end time.
RMG_0049
Execute registration of periodical connection
schedule. Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0050
Periodical Connection setting frame display
completed.
None.
RMG_0051
Failed to register the periodical connection
schedule. (xxx)
Check whether the network
status is normal.
RMG_0052
Failed to set the periodical connection
schedule. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0054
Registration of the periodical connection
schedule
completed.
None.
RMG_0056
Failed in the connection check
notification.(xxx)
Check whether the network
status is normal.
RMG_0186
Failed to send notice of changing agent
information.
RMG_0187
Failed to send agent information.
TABLE 6.15 Messages in the [Customer Information] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.