Filter
Top Products
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
55
C122-E180-01EN
problem is not solved,
contact the support center.
RMG_0123
Exportation of the environment information
has been completed.
None.
RMG_0124
Exportation of the customer information has
been completed.
RMG_0125
Export customer information to a file.
Click the [OK] or [Cancel]
button
RMG_0126
Export the environment information to a file.
-
Close this screen after you finish export.
Close the screen after
finishing export.
TABLE 6.20 Messages in the [Connection check] window or [Connection check information] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Invalid CGI parameter specified.
RMG_0004
Failed to make frame screen data. (xxx)
RMG_0015
Invalid CGI parameter specified.
Correct the entered value.
RMG_0041
Failed to setting Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0053
Execute the connection check. Are you sure?
Click the [OK] or [Cancel]
button
RMG_0055
Connection check frame display completed.
RMG_0056
Failed in the connection check notification.
(xxx)
RMG_0058
Connection check notification completed.
None.
RMG_0181
Invalid E-mail address specified.
Enter a valid value.
RMG_0182
Enter E-mail address of administrator or
installer.
Specify a valid value.
RMG_0183
Specify [E-mail address for receiving results.].
Enter a valid value.
TABLE 6.21 Messages in the [Result of connection check] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004
Invalid CGI parameter specified.
RMG_0041
Failed to setting Machine status. (xxx)
RMG_0056
Failed in the connection check
notification.(xxx)
Check whether the network
status is normal.
RMG_0058
Connection check notification completed.
None.
None.
RMG_0185
Connection check frame display completed.
TABLE 6.22 Messages in the [Temporary Disconnection] window or [Reconnection] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0059
Execute temporary disconnection to the
REMCS Center. Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0060
Reconnection to the REMCS Center
None.