Filter
Top Products
CHAPTER 8 Notes on Using REMCS GUI
8.1 Notes on Using REMCS GUI
64
C122-E180-01EN
Notes on Using REMCS GUI CHAPTER 8
This chapter describes the notes on using the REMCS GUI.
8.1 Notes on Using REMCS GUI
The REMCS GUI is displayed in a separate window when the REMCS menu is selected from the MMB Web
UI.
At this time, if a security software product with a firewall function has been installed on the personal
computer or the like used to run the Web browser, it may block cookies or other information from the site
being browsed depending on the default settings. Such products include Symantec Client Firewall and
Norton Internet Security manufactured by Symantec Corporation. In this case, a message window displaying
[This session was disconnected.] appears, and the REMCS window is not displayed. The setting must be
changed so that cookies or other information from the browsed sites are not blocked.
The setting procedure for cases where Symantec Client Firewall is used is provided below. For details on
other software products, see the manuals and the HELP menu for each product.
1. Run Symantec Client Firewall to display its window.
2. Select [Privacy control], and then click the [Setting] button.
3. When the [Privacy control] window appears, click the [Custom level] button.
4. When the [Customizing privacy setting] window appears, select [None: Permits cookies] for [Cookie
block] and uncheck [Enable browser privacy]. Then click the [OK] button.
5. When the [Privacy control] window is displayed again, click the [OK] button to complete the setting.
After the REMCS GUI is displayed, the connection is canceled if no input occurs within the time specified for
[Timeout] of [Web (HTTP/HTTPS)]. [Web (HTTP/HTTPS)] is accessed by selecting [Network] - [Network
Protocols] in the [MMB Web-UI] window.
Only one user can use the REMCS GUI concurrently. If any other user is already logged in, the following
window appears:
TABLE 8.1 REMCS message window