Filter
Top Products
CHAPTER 4 REMCS Service Operations
4.2 REMCS Service Menu
37
C122-E180-01EN
FIGURE 4.17 [Reconnection] window
4.2.13 HW Config. Info.
Use this menu item to send the hardware configuration information of the server to the REMCS Center.
From the menu in the window shown in FIGURE 4.1 [REMCS initial] window, click [HW Config. Info.] to
display the window shown in FIGURE 4.18 [Sending Hardware Configuration Information] window.
1. Click the [Send] button.
A confirmation dialog box appears. Send the hardware configuration information to the REMCS
Center.After processing completes, a pop-up window appears with the results. Then, the window shown
in FIGURE 4.1 [REMCS initial] window appears.
FIGURE 4.18 [Sending Hardware Configuration Information] window
4.2.14 SW Config. Info.
Use this menu item to send the software configuration information of the server to the REMCS Center.
From the menu in the window shown in FIGURE 4.1 [REMCS initial] window, click [SW Config. Info.] to
display the window shown in FIGURE 4.19 [Sending Software Configuration Information] window.