Filter
Top Products
CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings
5.1 Overview of REMCS Service Detail Settings
39
C122-E180-01EN
CHAPTER 5 REMCS Service CHAPTER 5
Detail Settings
This chapter describes the detail settings of the REMCS service.
5.1 Overview of REMCS Service Detail Settings
REMCS Service Detail Settings are used to make detailed settings such as the transmission retry count and
timeout triggers for avoiding transmission problems. They are also used to change the REMCS Center to
connect to, switch the machine name to be displayed, and for other purposes.
Normally, these settings need not be used. Use them when so instructed by a field engineer or the support
center.
To start the window to be used for the REMCS service detail settings, select [Maintenance] - [REMCS] -
[Detail Setup] from the MMB Web-UI.
The initial window shown in FIGURE 5.1 FE operation initial window appears.
FIGURE 5.1 FE operation initial window
TABLE 5.1 Items of the FE operation initial window
Item
Description
Detail environment settings
Change the timeout triggers, the retry count, etc., that are applicable
when the Internet is used.
Selecting REMCS Center
Changes the REMCS Center to connect to.
Select language
Switches the displayed language between Japanese and English.
Machine name display
change
Specifies whether to use the machine ID or a unique name as the
machine name displayed by the Web-GUI.
Deleting the personal
information
Deletes the personal information included in the customer
information.
Display of SSL Certificate
SSL certificate acquired by SMTP server will be displayed when
sending is done on SMTPoverSSL (*1). If SSL certificate does not
exist, following message will appear:
“ RMG_0229: TBD ”
*1: When STARTTLS or SSL/TLS is selected as type of encryption
connection on [Environment settings] window