Filter
Top Products
CHAPTER 3 REMCS Service Start Procedure
3.3 Importing the Registration Information
19
C122-E180-01EN
- Notification of the result to the installer:
Specify whether to report the result to the installer. If you select notification, set the installer's e-mail
address in [E-mail address for receiving results].
2. Click the [Check] button to perform the connection check and display the window in FIGURE 3.13
[Result of connection check] window.
FIGURE 3.13 [Result of connection check] window
3. Click the [OK] button.
After the connection check is completed, the window in FIGURE 4.1 [REMCS initial] window appears.
3.3 Importing the Registration Information
The window shown in FIGURE 3.14 [Importation of the REMCS settings] window appears when you click
[Import from the local files] in the window shown in FIGURE 3.4 [Initial Settings] window. It imports the
specified setting information files (the environment information file and customer information file) and
performs automatic setting.
You can use the setting information files backed up in the same or different machine.