Filter
Top Products
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
56
C122-E180-01EN
completed.
RMG_0061
Temporary disconnection to the REMCS
Center completed.
RMG_0062
Temporary disconnection frame display
completed.
RMG_0063
Reconnection frame display completed.
RMG_0064
Execute reconnection to the REMCS Center.
Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0092
Registration has not executed, Setup is
incomplete.
Retry after registration is
complete.
TABLE 6.23 Message in the [Sending Hardware Configuration Information] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you
retry the operation, exit
and
restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004 Invalid CGI parameter specified.
RMG_0130
Sending Hardware Configuration Information
frame display completed.
None.
RMG_0132
Sending hardware configuration information
completed.
RMG_0133
Failed to send hardware configuration
information. (xxx)
Check whether the network
status is normal.
RMG_0136
Send hardware configuration information to
the REMCS Center.
Click the [OK] or [Cancel]
button.
RMG_0138
Execute hardware configuration information
sending. Confirm sending result on event log
display frame.
Confirm sending result on
event log display frame.
RMG_0140
Hardware configuration information sending
started.
None.
TABLE 6.24 Message in the [Sending Software Configuration Information] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you
retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004 Invalid CGI parameter specified.
RMG_0131
Sending Software Configuration Information
frame display completed.
None.
RMG_0134
Sending software configuration information
completed.
RMG_0135
Failed to send software configuration
information. (xxx)
Check whether the network
status is normal.
RMG_0137
Send software configuration information to the
REMCS Center.
Click the [OK] or [Cancel]
button.
RMG_0139
Execute software configuration information
sending. Confirm sending result on event log
display frame.
Confirm sending result on
event log display frame.
RMG_0141
Software configuration information sending
started.
None.
TABLE 6.25 Messages in the CE initial frame
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you
retry the operation, exit
and
restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004 Invalid CGI parameter specified.