Filter
Top Products
CHAPTER 6 REMCS Messages
6.2 Communication Error Messages (SMTP Communication)
60
C122-E180-01EN
TABLE 6.34 Messages in the [Replacement to the previous certificate] window
Message code
Message
Action
RMG_0001
Failed to get Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0041 Failed to setting Machine status.(xxx)
RMG_0216
The certificates will be replaced. Once the
replacement of certificates proceeds, the
report to the REMCS center will not be done
until connected confirmation is completed.
Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0220
The frame display of the previous certificate
restoration has been completed.
None.
RMG_0221
Failed to restore to the previous certificate.
(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0222
The restoration to the previous certificate has
been completed.
None.
TABLE 6.35 Messages in the [Display of certificate] window
Message code
Message
Action
RMG_0002
Failed to make frame screen data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0004 Invalid CGI parameter specified.
RMG_0223
The frame display of the certificate has been
completed.
None.
6.2 Communication Error Messages (SMTP Communication)
The following list shows the error messages displayed in the windows when communication errors occur.
The communication error messages also indicate the action to be taken. Handle errors by referring to this
information. If the problem is not solved even if action is taken, contact the support center.
In messages, RL indicates the return value of the REMCS library, and ML indicates the return value of the e-
mail sending part.
TABLE 6.36 List of communication error messages (SMTP communication)
Message code
Message
RMG_2000
(SMTP)There is no valid E-Mail address.
The E-Mail address is not set up correctly.
RL:xxx,ML:xxx
RMG_2001
(SMTP)Insufficient memory to run this operation.
Please quit unnecessary applications, and try again.
RL:xxx,ML:xxx
RMG_2002
(SMTP)File access error. There is no file. Please confirm
following check.
- Please check whether /var capacity is sufficient.
RL:xxx,ML:xxx
RMG_2003
(SMTP)Communication timeout error was detected.
Please try again after several minutes.
When you do not solve the trouble, please check the network
between the mail(SMTP) server, and check whether the SMTP
server is running.
RL:xxx,ML:xxx
RMG_2004
(SMTP)An error was detected by the specified mail(SMTP)