Filter
Top Products
CHAPTER 3 REMCS Service Start Procedure
3.2 REMCS Center Registration
10
C122-E180-01EN
FIGURE 3.3 [Selecting REMCS Center] window
1. Click the [Next] button.
The REMCS Center to connect to is registered. Then, the [Initial Settings] window for setting up the
environment appears.
3.2.3 Setting up the environment
Set up the environment from FIGURE 3.4 [Initial Settings] window. Specify the connection configuration you
selected in 2.2 Connection Configuration for Connecting to the REMCS Center.
You can also set up the environment by importing the setting information (environment information such as
the SMTP server address and sender e-mail address as well as customer information such as the customer
name and administrator's e-mail address) of another machine or the setting information that was backed up
and saved in your machine.
After setting the REMCS service, you can still change the connection type by clicking [Initial Settings] from the
menu in the window shown in FIGURE 4.1 [REMCS initial] window.