Filter
Top Products
5-4 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
5. Keep the door in a safe place.
To reinstall the door, reverse the above steps for removing it.
FIGURE 5-2 How to Remove a Door (Front Door)
5.4 How to Remove a Side Panel
To install an optional power supply cabinet or to connect an expansion cabinet to the
M9000 base cabinet, the side panel of the cabinet must be removed.
The side panel hangs from a bracket on the top of the cabinet, and the lower part of
the side panel is secured with a screw or screws.
The structures of side panels are the same even for side panels of different sizes. A
large side panel is secured with two screws, and a small one is secured with one
screw.
Operator panel
Cable holder
Sensor unit