Filter
Top Products
13-10 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
11. Mount the replacement PCI card on the PCI cassette. (Perform this work on the
conductive mat.)
FIGURE 13-6 shows card positioning post and card positioning tab.
FIGURE 13-6 Card positioning post and card positioning tab
The post (item 1 in FIGURE 13-6) is seated in the notch of the bracket of the PCI card.
If the post is not properly seated in the notch, the mounting bracket of the card may
be bent and the card may end up being affixed in an inclined position on the PCI
cassette. If a card is affixed in an inclined position, it will not be in proper electric
contact with the socket on the IOU.
The tab (item 2 in
FIGURE 13-6) fits in the notch on the lower part of the PCI card.
This tab is helpful in positioning the card when it is mounted on the PCI cassette
(however, some types of cards do not have the notch).
TABLE 13-2 Card positioning post and card positioning tab
Item Description
1 Card positioning post
2Card positioning tab
1
2