Filter
Top Products
9-10 SPARC Enterprise M8000/M9000 Servers Service Manual • June 2010
4. Ensure that the metallic underside of the wrist strap is in direct contact with
your skin. The wrist strap should be snug around the wrist so that it does not
rotate. See Section 1.4, “Antistatic Precautions” on page 1-6.
Caution – Before handling FRUs, be sure to connect the clip of the antistatic wrist
strap and of the antistatic mat to the server grounding port, and attach the band of
the wrist strap to one of your wrists. Place the FRUs on the grounded antistatic mat.
Failure to take these antistatic measures might result in serious damage.
5. Using a Phillips screwdriver, loosen the knob screw of the fixing bracket of the
PSU to release the bracket.
6. While pushing the lock lever (green) of the PSU to be replaced, raise the handle
to about 45 degrees, and pull out the PSU slowly from the slot.
FIGURE 9-8 Removing the PSU (Front of M8000)
1
2
3