Filter
Top Products
Video problems 101
The color monitor displays everything in black and white.
The displayed characters are garbled.
The video is distorted.
Probable cause Solution
The system was turned on
before the monitor
Make sure the monitor is turned on, then
restart the system.
The display type is set
incorrectly
In theControl Panel window (Start | Settings |
Control Panel), double-click Display,setthe
display to the appropriate monitor type, then
restart the system.
Probable cause Solution
The video cable is damaged Make sure the cable and connectors are in
good condition (no bent pins or broken wires).
The display setup is incorrect In the Control Panel window (Start | Settings |
Control Panel), double-click Display and
check the settings. The correct video type
should be selected, along with a supported
resolution. Check your monitor and video
controller documentation for details.
Probable cause Solution
The monitor controls are not
properly adjusted
Adjust the monitor controls until the text
becomes clear. (See your monitor
documentation for more information.)
The connector or cable is
damaged
Make sure the cable and connectors are in
good condition (no bent pins or broken wires).
The surge protector or UPS is
damaged
Disconnect the monitor power cable and
connect it directly to the power source.
05032.book Page 101 Monday, July 10, 2000 11:43 AM