Closing the case 21
Replacing the side cover
To replace the chassis cover:
1 Hold the left side panel at an angle to the chassis and 3/4-inch to the rear.
2 Engage the retaining strip on the bottom edge of the panel with the lip
at the bottom edge of the chassis.
3 Swing the top of the panel toward the chassis, engaging the retaining
tabs on the top edge of the side panel with the slots on the chassis.
4 Slide the panel toward the front of the chassis 3/4-inch, securing it in
place.
5 Retighten the thumbscrews and lock the case, if necessary.
05032.book Page 21 Monday, July 10, 2000 11:43 AM