Filter
Top Products
60 Replacing and Adding System Components
8 Remove the two screws securing the bottom drive cage to the front of
the chassis and the two screws securing it to the right side of the chassis.
9 Slide the bottom drive cage toward the left side of the chassis, then toward
the back, disengaging it from the middle drive cage and the chassis.
10 Carefully remove the bottom drive cage from the chassis.
11 Remove the four screws securing the front system fan to the bottom drive
cage, then lift the fan from the cage. Note the routing of the fan power
cable.
05032.book Page 60 Monday, July 10, 2000 11:43 AM