GE EPM 9650/9800 Computer Monitor User Manual


 
Address Line Pt
DNP
Ob
j
Description Range Units Type R/W
45481 Calculated Neutral Current Above Setpoint +327.67% / -327.68% 0.01% R
45482 Calculated Neutral Current Below Setpoint +327.67% / -327.68% 0.01% R
45483 Phase A-B Voltage Above Setpoint +327.67% / -327.68% 0.01% R
45484 Phase A-B Voltage Below Setpoint +327.67% / -327.68% 0.01% R
45485 Phase B-C Voltage Above Setpoint +327.67% / -327.68% 0.01% R
45486 Phase B-C Voltage Below Setpoint +327.67% / -327.68% 0.01% R
45487 Phase C-A Voltage Above Setpoint +327.67% / -327.68% 0.01% R
45488 Phase C-A Voltage Below Setpoint +327.67% / -327.68% 0.01% R
45489-45490 Waveform Enables (Limit Above, Limit Below) R
45491-45492 PQ Enables (Limit Above, Limit Below) R
45493-45496 Reserved
45497 Sample Rate and Total Captures R
45498 Mode and CBEMA Enable R
45499 High Speed Input Waveform and PQ Enables R
45500 256 Samp/Cyc Channel Selection and 512 Samp/cyc Channel Selection R
45501-45508 Input 1 Name R
45509-45516 Input 1 Open Label R
45517-45524 Input 1 Close Label R
45525-45526 Input 1 Value R
45527 Input 1 Mode R
45528 Reserved
45529-45536 Input 2 Name R
45537-45544 Input 2 Open Label R
45545-45552 Input 2 Close Label R
45553-45554 Input 2 Value R
45555 Input 2 Mode R
45556 Reserved
45557-45564 Input 3 Name R
45565-45572 Input 3 Open Label R
45573-45580 Input 3 Close Label R
45581-45582 Input 3 Value R
45583 Input 3 Mode R
High Speed Input Settings Block
2- 148