Filter
Top Products
Loading paper
www.hp.com/photosmart 13
Load paper in the photo
tray
Use the printer’s photo tray to
print on 4 x 6 inch (102 x 152
mm) photo paper. When you use
the photo tray, you can leave
your regular paper in the paper
tray.
1. On the output tray, move the slider (visible through the output tray) toward you (away
from the inside of the printer) until it stops. This disengages the photo tray.
2. Lift the output tray.
3. Load paper in the photo tray with the
print side
down
. If you are using tabbed paper, feed or
place the tabbed paper into the printer so the tab
feeds in last.
4. Lower the output tray to its original position.
5. On the output tray, move the slider away from you
(toward the inside of the printer) until it stops
against the edge of the paper. This engages the
photo tray.
Note:
When you are finished using the photo tray, disengage it so the printer will use the
paper in the paper tray.
Load a single envelope
Use the printer’s single-envelope
slot to print one envelope at a
time.
• Load the envelope into the single-envelope slot with
the address side down and the flap on the left. Slide
the envelope in until it stops.
Tip:
See the picture on the printer.
To... Follow these steps...