Filter
Top Products
3/27/97 10:47 am Final version given to printer
...............................................................................................................
1-3
HP Company Confidential
1. Setting Up
Perform each step in sequence:
All steps are required!
1. Load the Tray
This is easiest to do when you are standing directly over the HP
OfficeJet with the front facing you. The tray fits into the back of the
HP OfficeJet near the top as shown.
●
Hold the sides of the paper/document tray and insert the bottom
tabs into the guides as shown.
●
The tray should click into place. Refer to the above inset drawing
for how it should look after proper placement.
2. Plug in the Line Connector
This is easiest to do when you’re facing the back of the HP OfficeJet.
●
Insert the fax/phone line connector into its
housing area on the back of the HP Office-
Jet. Press it firmly into place. (Once in
place, it’s difficult to remove.)
●
Plug the loose end of the phone cord into
the telephone wall jack you’ll be using for
your fax number.
OJ-OJ
tray placement
After proper
Paper/Document
Tray
Bottom tab
Guide
OJ-3insliu