Filter
Top Products
3/27/97 10:47 am Final version given to printer
...............................................................................................................
1-4
HP Company Confidential
3. Connect the Cables
Important: You must attach the enclosed bidirectional parallel cable
from the HP OfficeJet to your computer. If you don’t, the OfficeJet
won’t work.
●
For safety, turn off your computer before connecting the cables.
●
Connect the
notched end of the
bidirectional paral-
lel cable firmly to
the cable port on
the back of the HP
OfficeJet. Snap
both metal clips
into the notches on
the connector.
●
Plug the other end
of the cable into the parallel (LPT1) port on the back of your
computer. Tighten the connector’s screws.
●
Plug the HP OfficeJet’s power cable into a grounded outlet.
4. Insert the Print Cartridges
●
After you plugged in the power, the HP OfficeJet powered up
automatically. Note that the display on the keypad will read, “See
instructions to print demo” until after you install the software in
Step 7.
●
Wait until the HP OfficeJet finishes making start-up noises (about
10 seconds), then open the cover of the HP OfficeJet. The empty
print cartridge holder will move into view.
OJ-5insbidi
Cable port
Notched end
of cable
OJ-7ocover
Cover