HP (Hewlett-Packard) 6600 Switch User Manual


 
Getting Started
Introduction
Introduction
This guide is intended for use with the following ProCurve switches:
8200zl switches
6600 switches
5400zl switches
3500, 3500yl and 6200yl switches
It describes how to use the command line interface (CLI), Menu interface, and
web browser to configure, manage, monitor, and troubleshoot switch opera-
tion. For an overview of product documentation for the above switches, refer
to “Product Documentation” on page xiii. To download the switch documen-
tation, visit the ProCurve Networking manuals web page at t www.hp.com/go/
procurve/manuals.
Conventions
This guide uses the following conventions for commands and screen displays.
Command Syntax Statements
Syntax: ip < default-gateway < ip-addr >> | routing >
Syntax: show interfaces [port-list ]
Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
Braces ( < > ) enclose required elements.
Braces within square brackets ( [ < > ] ) indicate a required element within
an optional choice.
Boldface indicates use of a CLI command, part of a CLI command syntax,
or other displayed element in general text. For example:
“Use the copy tftp command to download the key from a TFTP server.”
Italics indicate variables for which you must supply a value when execut-
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
1-2