Filter
Top Products
Monitoring and Analyzing Switch Operation
Traffic Mirroring
Syntax: show monitor
Type: Indicates whether the mirroring session is local (port),
remote (IPv4), or MAC-based (mac) for local or remote sessions.
Sources: Indicates how many monitored source interfaces are
configured for each mirroring session.
Policy: Indicates whether the source is using a classifier-based
mirroring policy to select inbound IPv4 or IPv6 traffic for
mirroring.
If a remote mirroring endpoint is configured on the switch, then
the following information is displayed. Otherwise, the output
displays: There are no Remote Mirroring endpoints currently assigned.
Type: Indicates whether the mirroring session is local (port),
remote (IPv4), or MAC-based (mac) for local or remote sessions.
UDP Source Addr: The IP address configured for the source VLAN
or subnet on which the monitored source interface exists. In
the configuration of a remote session, the same UDP source
address must be configured on the source and destination
switches.
UDP port: The unique UDP port number that identifies a remote
session. In the configuration of a remote session, the same UDP
port number must be configured on the source and destination
switches.
UDP Dest Addr: The IP address configured for the destination
VLAN or subnet on which the remote exit port exists. In the
configuration of a remote session, the same UDP destination
address must be configured on the source and destination
switches.
Dest Port: Identifies the exit port for a remote session on a
remote destination switch.
B-77