Filter
Top Products
Redundancy (Switches 8200zl)
Event Log Messages
# System Message Severity Description
15 Mgmt Module [1 or 2] - Running
different version of SW
info The specified management module is running a
different version of software from the other
management module.
RMON_SYSTEM_MGMT_OS_DIFF
16 Mgmt Module [1 or 2] - Failover
occurred
warn Switchover occurred. The specified management
module is the newly active management module
RMON_SYSTEM_MGMT_FAILOVER
17 Mgmt Module [1 or 2] - User initiated
switchover occurred
info The user has initiated switchover using the
redundancy switchover command so that the other
management module can become the active
management module.
RMON_SYSTEM_MGMT_SWITCHOVER
18 Mgmt Module [1 or 2] - Offline
(incompatible SW versions)
warn The software version in the specified management
module is not compatible with the other module and
it has gone offline.
RMON_SYSTEM_MGMT_INCOMPAT_OS
19 Other management module is not in
standby, shutdown request ignored
warn A shutdown request is ignored because the
standby module is not in standby mode. A
management module must be in active or standby
mode to be shut down. The module goes into a
“down” state which allows you to safely swap it
out.
RMON_SYSTEM_MGMT_HSBUTTONERR
20 Mgmt Module [1 or 2] Offline
(shutdown)
info The specified management module is offline
because of a shutdown.
RMON_SYSTEM_MGMT_SHUTDOWN
22 Syncing [primary |secondary] OS to
standby
info This message is logged when the OS begins
synchronizing to the standby module.
RMON_SYSTEM_OS_SYNC
23 Standby boot image updated, rebooting
standby
info This message is logged when the standby’s
management module boot image is overwritten,
requiring a reboot.
RMON_SYSTEM_STANDBY_REBOOT
15-47