Filter
Top Products
PCL5c
Configure these PCL5c settings:
●
Font number
●
Font pitch
●
Font point size
●
Symbol set
●
Append CR to LF
●
Form length
PostScript
Use the PostScript option when using the PostScript print personality. When the Print PostScript
error option is turned on, the PostScript error page automatically prints when PostScript errors occur.
NOTE Click Apply to make the changes take effect.
Memory card (HP Color LaserJet CM1017 MFP only)
Use the three HP ToolboxFX memory card options to configure print settings when using memory cards.
●
Photo image size. Select the size photos to print from the drop-down list.
●
Photo number of copies. Type the number of copies from 0 to 99 to print for each image.
●
Photo output color. Select either Color or Monochrome from the drop-down list.
Click the Enable memory cards checkbox to save the settings.
Network settings
The network administrator can use the HP ToolboxFX Network Settings Tab folder to control the
network-related MFP settings when it is connected to an IP-based network.
The settings are:
●
IP Configuration
●
Advanced
●
SNMP
●
Network Configuration
154 Chapter 13 Managing and maintaining the multifunction peripheral (MFP) ENWW