Filter
Top Products
Table C-4 Power consumption (average, in watts)
1
Product
model
Printing (Color)
2
Printing (Black and
White)
2
Copying
2
Ready
2
Power Save Off
HP Color
LaserJet
CM1015 MFP
200 W 190 W 150 W 18 W 18 W 0 W
HP Color
LaserJet
CM1017 MFP
200 W 190 W 150 W 18 W 18 W 0 W
1
Values subject to change, see http://www.hp.com/support/cljCM1015_CM1017 for current information.
2
Power reported is highest values measured for color and monochrome printing/copying using all standard voltages.
3
Default time from Ready Mode to Power Save = 0 minutes.
4
Recovery time from Power Save to start of printing = 14 seconds
5
Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour
6
HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
WARNING! Power requirements are based on the country/region where the MFP is sold. Do
not convert operating voltages. This can damage the MFP and void the product warranty.
Table C-5 Environmental specifications
Recommended
1
Operating
1
Storage
1
(MFP and print cartridge)
Temperature
20° to 27°C (68° to 81°F) 15° to 32.5°C (59° to 90.5°F) -20° to 40°C (-4° to 104°F)
Relative humidity 20% to 70% 10% to 80% 95% or less
1
Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017 for current information.
Table C-6 Acoustic emissions
1
Sound Power Level Declared Per ISO 9296
1
Printing/Copying (8 PPM)
2
Ready
L
WAd
= 5.8 Bels (A) [58 dB (A)]
Inaudible
Sound Pressure Level (SPL)-Bystander Position Declared Per ISO 9296
1
Printing/Copying (8 PPM)
2
Ready
L
pAm
= 46 dB(A)
Inaudible
1
Values are subject to change. See http://www.hp.com/support/cljCM1015_CM1017 for current information.
2
Configuration tested: HP Color LaserJet CM1017 MFP, continuous monochrome printing on A4 paper at 8 PPM.
3
HP Color LaserJet CM1015 MFP and HP Color LaserJet CM1017 MFP speed is 8 PPM Letter and A4 size.
Table C-7 Paper and print media support specifications table
Category Specifications
Acid content 5.5 pH to 8.0 pH
Caliper 0.094 to 0.18 mm (3.0 to 7.0 mils)
ENWW Multifunction peripheral (MFP) specifications 229