Filter
Top Products
HP Color LaserJet CM1015 MFP control panel features
The HP Color LaserJet CM1015 MFP contains the following lights and buttons on the control panel:
NOTE Print a demo page by pressing the Scan To and Start Scan buttons simultaneously.
1 Supplies gauges: Displays consumption levels of print cartridges. Appears when the MFP shows the Ready state with
no warnings, or when the MFP shows a warning or error message pertaining to a print cartridge or multiple supplies.
When the supply is empty the gauge displays as empty. Flashing indicates a single supply is empty. These messages
can display when:
●
Missing cartridges
●
Incorrectly placed cartridges
●
Cartridges with an error
●
Some non-HP cartridges
CAUTION Printing may continue when a non-HP supply is empty. To prevent MFP damage, frequently check
the status of non-HP supplies. See
Hewlett-Packard limited warranty statement.
NOTE When a “?” displays on-screen, it may be because the supply is missing, it is a non-HP supply, or the
status is being determined by the MFP.
2 Amber activity light: An error has occurred. Printer requires attention.
3 Right arrow (>): Press to navigate to the next submenu or the next value in the menu selection list. Also allows cursor
movement forward a single position, or increments a numeric entry.
18 Chapter 3 Control panel ENWW