Filter
Top Products
HP Device Configuration (Mac OS X V10.3 and Mac OS
X V10.4)
HP Device Configuration is a software program that provides access to information about the MFP (for
example, information about supplies status and MFP settings). Use the HP Device Configuration to
monitor and manage the MFP from the computer.
NOTE Perform a complete software installation to use the HP Device Configuration.
●
Check the MFP status and print information pages.
●
Check and change MFP system settings.
●
Check default MFP settings.
●
Check and change network settings, including Advanced, Bonjour printer name, SNMP, network
configuration, and password.
View the HP Device Configuration when an MFP is directly connected to a computer or when it is
connected to the network.
NOTE Internet access is not required to open and use the HP Device Configuration.
To view HP Device Configuration when the MFP is directly connected to the computer
1. Open HP Director by clicking the HP Director icon in the dock.
2. In HP Director, click Settings.
3. Select Configure device to open the HP Device Configuration home page in a browser.
To view HP Device Configuration when the MFP is connected to a network
1. Open one of the following supported Web browsers:
●
Safari 1.2 or later
●
Microsoft Internet Explorer 5.0 or later
●
Netscape Navigator 4.75 or later
●
Opera 6.05 or later
●
FireFox 1.5 or later
2. Enter the IP address of the MFP into the Web browser to open the HP Device Configuration home
page.
ENWW HP Device Configuration (Mac OS X V10.3 and Mac OS X V10.4) 45