Filter
Top Products
Solving common Macintosh problems
Problems with Mac OS X V10.3 and Mac OS X V10.4
The printer driver is not listed in Print Center.
Cause
Solution
The device software might not have been installed or was installed
incorrectly.
Reinstall the software. See the getting started guide for instructions.
The device name does not appear in the printer list box in the print center.
Cause
Solution
The device might not be ready. Make sure that the cables are connected correctly, the device is
on, and the ready light is on. If you are connecting through a USB
hub, try connecting directly to the computer or use a different port.
The wrong device name is being used. Print a Configuration report. See Information pages. Verify that the
name on the Configuration report matches the device name in the
Print Center.
The interface cable might be defective or of poor quality. Replace the interface cable. Make sure to use a high-quality cable.
A print job was not sent to the printer that you wanted.
Cause
Solution
The print queue might be stopped. Restart the print queue. Open print monitor and select Start Jobs.
An encapsulated PostScript (EPS) file does not print with the correct fonts.
Cause
Solution
This problem occurs with some programs.
●
Try downloading the fonts that are contained in the EPS file to
the device before printing.
●
Send the file in ASCII format instead of binary encoding.
You are unable to print from a third-party USB card.
Cause
Solution
This error occurs when the software for USB printers is not installed.
When adding a third-party USB card, you might need the Apple
USB Adapter Card Support software. The most current version of
this software is available from the Apple Web site.
100 Chapter 9 Problem solving ENWW