Filter
Top Products
Supported media weights and sizes
For optimum results, use conventional 80 to 90 g/m
2
(20 to 24 lb) photocopy paper. Verify that the
paper is of good quality and is free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, curls,
and bent edges.
NOTE The device supports a wide range of standard and custom sizes of print media. The
capacity of trays and bins can vary depending on media weight and thickness and on
environmental conditions. Use only transparencies that are designed for use with HP LaserJet
printers. Inkjet and monochrome transparencies are not supported for the device.
Table 3-1 Priority input tray specifications
Media
Dimensions
1
Weight
Capacity
2
Paper Minimum: 89 x 44 mm (3.5 x
1.75 inches)
42 to 260 g/m
2
(11 to 69 lb) Up to 10 sheets of 80 g/m
2
or 20
lb paper
Maximum: 216 x 356 mm (8.5
x 14 inches)
HP Cover paper
3
Same as the preceding listed
minimum and maximum sizes
203 g/m
2
(75 lb cover)
1 sheet
Transparencies and opaque film
Thickness: 0.10 to 0.13 mm
(3.9 to 5.1 mils)
1 transparency
Labels
4
Thickness: up to 0.23 mm (up
to 9 mils)
1 sheet of labels
Envelopes
Up to 90 g/m
2
(16 to 24 lb)
Up to 10
1
The device supports a wide range of standard and custom sizes of print media. Check the printer driver for supported sizes.
2
Capacity can vary depending on media weight and thickness, and environmental conditions.
3
Hewlett-Packard does not guarantee results when printing with other types of heavy paper.
4
Smoothness: 100 to 250 (Sheffield).
ENWW Supported media weights and sizes 21