Filter
Top Products
The device does not appear in the Macintosh Print Center after the driver is selected.
Cause
Solution
This problem is caused by either a software or a hardware
component.
Software problem solving
●
Check that your Macintosh supports USB.
●
Verify that your Macintosh operating system is Mac OS X
V10.3 or Mac OS X V10.4.
●
Ensure that your Macintosh has the appropriate USB software
from Apple.
Hardware problem solving
●
Check that the device is turned on.
●
Verify that the USB cable is connected correctly.
●
Check that you are using the appropriate high-speed USB
cable.
●
Ensure that you do not have too many USB devices drawing
power from the chain. Disconnect all of the devices from the
chain, and connect the cable directly to the USB port on the
host computer.
●
Check to see if more than two nonpowered USB hubs are
connected in a row on the chain. Disconnect all of the devices
from the chain and connect the cable directly to the USB port
on the host computer.
NOTE The iMac keyboard is a nonpowered USB
hub.
ENWW Solving common Macintosh problems 101