Filter
Top Products
Connect fax to a telephone line
▲
Connect the telephone cable to the line port
on the product and to the telephone jack on the
wall.
The product is an analog device. HP recommends using the product on a dedicated analog telephone
line.
NOTE: Some countries/regions might require an adapter to the phone cord that came with the
product.
Set up fax with a telephone answering machine
●
Set the product rings-to-answer setting for at least one ring more than the number of rings for
which the answering machine is set.
●
If an answering machine is connected to the same telephone line but on a different jack (in
another room, for example), it might interfere with the product's ability to receive faxes.
Set up fax with an extension phone
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3
sequentially on the telephone keypad. The default setting is On. Turn this setting off only if you use
pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence.
The telephone company service does not work if it conflicts with the product.
1. On the control panel, touch the Setup
button.
2. Scroll to and touch the Fax Setup menu.
3. Scroll to and touch the Advanced Setup button.
4. Scroll to and touch the Extension Phone button, and then touch the On button.
Setup for stand-alone fax
1. Unpack and set up the product.
2. From the Home screen, touch the Setup
button.
3. Touch the Fax Setup menu.
4. Touch the Fax Set-Up Utility button.
5. Follow the on-screen prompts and select the appropriate response for each question.
NOTE: The maximum number of characters for the fax number is 20.
NOTE: The maximum number of characters for the fax header is 25.
76 Chapter 6 Fax ENWW