Filter
Top Products
Installing the System
Accessing the Host Console
Chapter 3
129
Figure 3-43 Status Summary Page
Step 4. Select the web interface functions by clicking the Function tabs at the top of the page. Each function
lists options in the
Navigation Bar on the left side of the page.
Step 5. Click an option link to display data in the
Display screen.
Step 6. Click
Refresh to update the display.
The iLO MP web interface has a robust help system. To launch iLO MP help, click the Help tab in the Display
screen or click the question mark key (?) at the top right corner of each page to display help about that page.
Accessing the Graphic Console Using VGA
IMPORTANT Onboard VGA graphics capability is not supported. You must install the A6150 graphics card
to enable VGA grpahics support. See “Enabling VGA Graphics Capability” on page 130.
The graphics capability of your HP 9000 rp4410 or rp4440 server is not supported. The 15 pin VGA port on
the back of your HP server is covered and does not function. DO NOT attempt to attach a monitor to this port.
Because the graphics chip associated with this port is onboard the management processor card and cannot be
turned off, you get an UNCLAIMED UNKNOWN message if you run the ioscan command. This is normal and can
be ignored.
Following is a screen shot of the ioscan screen:
Function Tabs
Navigation Bar
Display Screen