Filter
Top Products
Installing the System
Installing Additional Components
Chapter 3
82
Figure 3-18 System Battery Location on I/O Baseboard
Step 5. Lift up the battery holder retaining clip with a flat-head screwdriver and push on the back of the
battery to remove the battery from its socket.
Step 6. Lift up the battery holder retaining clip with a flat-head screwdriver and slide the new battery into
the holder.
NOTE The positive terminal of the battery is designated by the plus (+) sign. The battery is
installed with the plus (+) sign facing up.
Step 7. Replace the I/O baseboard assembly. (See “Replacing the I/O Baseboard Assembly” on page 80.)
Step 8. Replace the top cover. (See “Replacing the Top Cover” on page 74.)
Battery