Filter
Top Products
Chapter 6
Removing and Replacing Components
System Memory DIMMs
188
NOTE The memory extender board can be removed without removing the server from the
rack.
Step 2. Remove the front bezel. (See “Removing the Front Bezel” on page 180.)
Step 3. Remove the front cover. (See “Front and Top Covers” on page 181.)
Step 4. Remove the memory extender board. (See “Removing a Memory Extender Board” on page 184.)
Step 5. Identify the DIMM to be removed and push the extraction levers found on either side of that DIMM
slot outward to the open position. The DIMM ejects from the slot.
Step 6. Remove the DIMM from the socket.
Installing Memory DIMMs
The standard configuration of HP 9000 rp4410 and rp4440 servers includes a 16-DIMM memory extender
board. This extender board must contain a minimum of one GB of memory (four 256 MB DIMMs loaded in
quad 0 [connectors 0A, 0B, 0C, and 0D]).