Filter
Top Products
Chapter 6
Removing and Replacing Components
Midplane Riser Board
256
Step 11. Remove the air baffle.
Step 12. Release the latches on the DVD I/O board cover and front panel display board cable to disconnect
the cable from the midplane riser board.
Step 13. Unplug the QuickFind diagnostic board cable from the midplane riser board.
NOTE At this point, all cables and connectors must be unplugged from the midplane riser
board.
Step 14. Using a Torx 15 driver, remove the five T-15 screws attaching the midplane riser board to the
chassis.
Step 15. Grasp the top edge of the midplane riser board and lift straight up to release it from the keyway
slots on the chassis.