Filter
Top Products
Chapter 6
Removing and Replacing Components
Removing and Replacing Core I/O Cards
249
CAUTION Always handle I/O cards by their edges. Failure to comply with this precaution can
result in damage to the card.
Ensure that you fully seat the card into the slot or the card can be damaged when
power is reapplied to the slot.
Figure 6-46 Install SCSI I/O Card
Step 2. Close the blue PCI card latch for slot 1 by twisting it counterclockwise.
Step 3. Reconnect the internal and external SCSI cables to the SCSI core I/O card.
Step 4. Replace the top cover. (See “Replacing the Top Cover” on page 183.)
Step 5. Push the server back into the rack until it stops.